Hi experts,
I was trough this thread : http://scn.sap.com/thread/1380775
Looking for a way to identify when BW is running the last data package to perform some treatments on it.
But the code proposed doesen't work in start routine or end routine neither.
I can find table reqtable, and G_S_MINFO-REQUNR
Is there any other way to identify the last data package?
Thanks for your support.
Amine
When I export from BW to Excel, I get this:
Customer Location Product Volume
XYZ Texas A1 10
A2 15
B3 20
Florida C2 15
Z1 7
But what I need is this:
Customer Location Product Volume
XYZ Texas A1 10
XYZ Texas A2 15
XYZ Texas B3 20
XYZ Florida C2 15
XYZ Florida Z1 7
Much appreciate any guidance!
My understanding is that I can do a unit of measure conversion to a DSO in version 7.3.
I have created a DSO with 0UNIT as a key figure. I have then created a transformation to my DSO from an infosource. In my transformation I have activated the option Allow Currency / Unit Conversion.
I have then created a rule that takes one key figure with UoM 0SALES_UNIT and that is converted to another key figure with with the UoM 0UNIT. I have created a conversion type that converts it all to UoM EA. I can then save and activate the the transformation no issue.
I can do this on one KF but when I try to do the same to another key figure e.g. have more than one KF with a UoM conversion I get the following error:
Message no. RSTRAN510
and when I dig deeper I get this error:
Message no. RG102
The data object "_G_1" does not have a component called "UNIT".
I can see numerous notes about Syntax and GP_ERR_RSTRAN_MASTER_TMPL but none seem appropriate to my error.
Has anyone had this issue or can anyone advise?
Thanks,
Joel
Hi All,
We are having an requirement to get a Flag(Y) to be updated when ever we are having a delta load.
In case if we are having the Repair full load then that flag should update as N.
Could you please let us know how to get the flag based on the delta load.
Depend on this flag, we are having the System date and time for the delta records update.
Please let me know if you need more infromation.
Note:
Daily we are having the Delta load and monthly once we are having Repair full load.
When I select an object to install with grouping "Data Flow Before", I am constantly presented with the attached window, which I either have to cancel or accept, during the object collection process. This occurs multiple times (up to 20, 30, or more) depending on the complexity of the data flow of the object, regardless of whether I accept, cancel, or accept with different options. My guess is that I'm being prompted for each DataSource that is encountered in the collection process, but the window only indicates the source system. Is there some setting or note I need to apply so that I can just accept once - it is making the content installation process take a lot longer than I had expected. Just to emphasize, this is on the object collection step and not the actual installation.
I am on BW 7.4 SP7 with BI Content 757 installed. I have replicated all datasources from my ECC source system (content and active).
Any tips or suggestions are appreciated.
Hi All,
I am new to SAP BW. As far as i understand, BW sends a request to the source systems which then triggers the extractors that sit on top of the source systems (for instance: ECC). I found in the SAP help documents that ROOSOURCE gives the details about the extractor that is running on a particular source system. I am trying to understand the performance issues in our BW system. I am trying to understand if the job took longer time in ECC (Extracting the data from source) or in BW (loading into BW using the Info package). I am looking for the underlying tables in ECC which have the job information, run times, its status(currently in running or waiting etc).
If anyone could point me to the underlying tables that would be great!
Thanks a lot in Advance!
Dear all,
I have few hierarchies which i activate manually everyday. I want to automate it using Process chain. I do not see any Process Variant as "Hierarchy Activation" there in RSPC. I tried to use "Save Hierarchy" but there it asks for Infopackage and this will not serve my purpose as I am activating few hierarchies which are directly created in Production system and for that there is no Infopackage to load it.
Please help me someone has faced this sort of issues and fixed it.
Regards,
Arvind
Hi Gurus,
I know that semantic group is define the data packages we load for key uniqueness of the data. Data with the same semantic keys will be grouped in a single data packet and it is also the key fields to the error stack.
My Doubt!!!!
For example: Material and Plant are the semantic keys and the data packet size is of 50k but the uniqueness values of this combination is 70k. how the data will be loaded?? will it bring 50K as the data packet size is 50k?? then what about the remaining 20k records??
May be it seems a silly question for many but please help me out to understand.
Thank you.
Kind Regards,
Venkatesh
Hello
We have created the following planning objects: filters, variables, functions of planning, planning sequence, querys and workbooks. We have not created any aggregation level, we used the standards provided by SAP. We are working with IBP.
Now doubts us about what order we have to follow to transport planning objects. For example if you select a workbook already brings us all the necessary objects, i.e., querys, planning functions, filters, planning sequences...
I attached a screenshot:
When selecting a work book transport already, it is including all the necessary objects for transport.
My question is:
Thanks for the help,
Hi gurus
I am having a data flow ds(flat file) dso and info cube and its a flat file load now my issue is now i want to add an extra field to the existing flat file structure but previously we are loading data to the flow now can i add filed to the existing data source or do i need to delete the old data its a flat file structure please throw some light on it.
Hi All
This maybe a basic question but for the life of me couldn't seem to figure this out in the query designer and hence the post here, I have a query which is based on a multiprovider (multiple DSOs and InfoCubes). I need to figure out which characteristic is taken from which infoprovider, I know I can go in the workbench and check but some InfoObjects are common in multiple infoProviders and mapped with different transformations from the source system. Is there a way in the query designer to figure this out ?
Thanks
Sameer
While activating DataStore Object data, we got the message Activation of M records from DataStore Object. We identified a record with a # in the data and wish to change in the PSA, but when we try to manage it, we get message no more maintenance possible. So how can we change and continue with the process chain?
Hi Guys,
Is it wise to perform a BW & ECC (connected source system) system upgrade in the same window?
Is there any particular steps in BW upgrade will it checks the source system? (i.e. XPRAS)
If we do plan the upgrade in the same window, what do we need to take care?
Thanks in advance.
Hi All,
I have a requirement to combine 2 GLs from 2 sources for local currency by vendor.
In Query designer,
Rows - I have a vendor & vendor group.
in columns, I have LC key figure with 2 GLs restriction.
1GL is from FBL3N and 2GL from FBL1N so both sources have LC value.
As you might aware, GL data can exist in FBL1n and FBL3N.
Can anybody give some idea.
Regards
Hi All
We have a business requirement where we need to extract CRM product portfolio in SAP BW. We have identified that Standard Data source 0CRM_PROD_OBJ_LIST extracts the required fields.But when we activated this in RSA5 and tested in RSA3 - it pulls zero records in RSA3 extraction.
1) Could anyone please let us know any background tables from where this fetches Data?
2) Do we need to perform some additional steps /settings for this datasource?
Thanks for help in advance!
Regards
Neha Dubey
Hi There,
What are the limitations that we need to consider when choosing Bex as the source for open hub?
I am seeing in forum Bex has 65K row limitation, is that holds true?
will bex go client out of memory , when used as source for open hub? is there any setting I can check. Please advise
Also I may need custom formatting say KF values output as 7, 2 decminals and have many such KF's.
I think in bex this can't be achieved.. what are the options, do we need to the transformations in Open hub transformation? or there is workaround? Please advise.
Hi All,
We have done recently BW production system copy to BW Dev and BW QA, We have successfully managed to swap client/system and RFC connections with R/3 Prod source system connection to R/3 Dev source system connection and connected to BW Dev with out getting effect to data flow and datassources.
Our BW system also connected to Legacy system with help of DB connect, we try to do the same exercise like R/3 with Legacy system, Datasource were getting deleted and data flow getting disturbed.
What will the best solution in this scenario ?
Thanks
Hari
Hi All
I have an interesting requirement but I am looking for the best way to approach this,
There is Monthy sales by state report that our client uses, currently the report shows sales per line item which results into very large number of records, the requirement is to make a new report (copy of the old one) and just show a few key figure InfoObjects summarized on the 'ship to' and 'division' attributes.
I know the Advanced DSO collects aggregates on the fly but this is a standard DSO, has anyone faced a need like this before ? What will be the best way to roll up Key Figures per attributes ?
Any help will be appreciated.
Thanks
Sameer
What would be the right approach to move from BW 7.0 SP27 to BW 7.5 SP3 with existing 3.x data-flows?
When we did a direct upgrade of sandbox from BW 7.0 SP27 to BW7.5 SP3 we have several deactivated / missing transfer rules for 3.x data-flows - especially on the master data dataflows. However someome 3.x dataflows did get activated and working right-away- especially transaction dataflows.
Is upgrading directly from 7.0 SP27 to 7.5 SP3 the right approach or is there a necessity to go via a intermediate 7.0 to 7.3 to 7.5 approach?
Is there a necessity to migrate 3.x dataflows first or at all? For that do we need to be atleast on 7.0 SP32 to get the 'migrate dataflow' option.
Is the SAP_BW_BEFORE_UPGRADE task list using tcode STC01 - a necessity before the upgrade? For that do we need to be atleast on SP31 or implement SAP Note 1734333 before the upgrade?
Being a non-HANA DB and having a lot of 'classic modelling objects' and no SAP 'HANA modelling objects' is it still ok to move to 7.5 SP3 or there is a necessity to convert the modelling objects?
Is it a necessity to go to BW 7.5 to get the Netweaver 7.4 basis component to be at par with rest of the latest versions of ECC, CRM EP Netweaver components?
Thanks in advance for your time BW professionals.
Regards,
Mahesh.N
Hello, experts!
I faced with a problem that via downloading data in PSA I loose part of data set. The BW connected with Oracle database and no one create new records there.
For example I know that I have 3 millions records in database (Oracle), but PSA get only 2,5 millions.
I'm trying adjust PSA preferences, but all that I find the capacity of package. It helped, but not at all. When I reducing package size I'm getting more data, but not whole again!
I'm changing parametrs of DB connect - Limits of connection, so it's doesn't matter as well.
I guess that it might be any basis parameter, but I don't know. Is it any buffer where cut my data or something else?
Please help, I cannot find other similar issues here.
Regards, Ruslan.